Heavy Duty Fold Down Feed Doors with Grills Heavy Duty Extruded Aluminum Fold Down Feed Doors with mid height recessed latch for easy access and fold down head grills for ventilation and added safety
	Greasable Hinges Featuring greasable hinges for easy maintenance.

Norstar Gooseneck Standard Features Aluminum slant load gooseneck horse trailer with front slant tack room and rear tack compartment Available sizes 2-HORSE gooseneck, 15'-0" floor length w/2-5200# axles, 15" tires & 6-hole wheels 3-HORSE gooseneck, 18'-3" floor length w/2-5200# axles, 16" tires & 6-hole wheels 4-HORSE gooseneck, 21'-6" floor length w/2-6000# axles, 16" tires & 8-hole wheels 5-HORSE gooseneck, 24'-9" floor length w/2-6000# axles, 16" tires & 8-hole wheels 6-HORSE gooseneck, 28'-0" floor length w/2-7000# axles, 16" tires & 8-hole wheels Dimensions 7'-1" body height 6'-10" body width, maximum interior width without interior fender wells 7'-10" gooseneck length Undercarriage Rubber torsion axles with four wheel independent suspension and greasable hubs for easy lubrication Electric brakes on all wheels Radial tires on silver modular wheels with stainless steel center caps Spare tire, wheel and rack Coupler & Jacks Adjustable hitch stem with 2-5/16" coupler and safety chains with hooks Heavy duty low profile gooseneck structure with wrap around aluminum main frame Single speed drop-leg jack with removable handle / lug wrench Emergency breakaway system; switch, cable, and battery box complete with battery (less charger) Design Features & Hardware All extruded aluminum construction Fully insulated roof, 1/2" thick "ENCOR" fiberglass reinforced structural panel w/R3 thermal value. The ultimate in temperature control Tapered nose, 6'-10" to 4'-10" wide with 18" radius corners for efficient aerodynamics 2" radius rear body corners & top rear header with upper ball corners Radius rocker panels around bottom of gooseneck structure & full length running boards along each side Extruded aluminum interlocking floor, with extruded cross member supports at 6" centers Solid extruded aluminum interlocking side walls on stall area with .050 pre-painted white aluminum above or smooth skinned with .050 white on complete exterior Smooth .050 pre-painted white aluminum sheets on the side walls of front tack room area, attached with VHB structural tape for a smooth seamless appearance Polished stainless steel front nose sheet Stainless steel door hold backs on all full height doors and rubber hold backs on feed doors Rubber dock bumper below rear door Bolt on aluminum fenders Stall Area Equipment Removable slant divider (per two stalls) with extruded aluminum solid head partitions and quick release stainless steel slam latches Rubber interior kick mat wall lining (1/4" thick), 48" high on rear doors, slant wall, & head wall (48" is not applicable to models with mangers) and 54" high on butt wall with .090 aluminum kick plates and 1 3/8" thick styrofoam insulation underneath Vet type rubber floor mats (5/8" thick) Rear stall door, 36 1/2" wide x full height with an all aluminum cast cam latch and 15"x22" radius corner sliding window Heavy duty extruded aluminum fold down feed door per stall, with mid height latch for easy access and adjustable striker plate Heavy duty fold down safety bar grills, one per feed door 2 & 3 horse models do NOT include side access door 4,5, & 6 horse models include heavy duty extruded aluminum side access door in lieu of fold down feed door at stall #1 Radius corner sliding windows with bar grills, 15"x22" on head side & 15"x34" on butt side, per stall Two-way aluminum flip-up roof vents, one per stall Rings only, for feed bags, three per stall Two interior and two exterior tie rings per stall Removable butt bar at rear stall door (removable chest bar at side access door in 4, 5, & 6 horse models) Lights DOT required lighting (stop, turn, tail, tag, marker, clearance and conspicuity tape) Double tail lights (two high and two low) Two recessed rear exterior loading lights above rear doors on separate circuit with remote switch Recessed dome lights on separate circuit with remote switches (one per stall, one in front tack room, and one in rear tack compartment) Front Tack Room Equipment Dimensions: 4'-0" to 8'-0" long x 6'-10" wide plus 7'-10" gooseneck Full height partition wall between stalls and front tack room Entry door, 32" wide, on street side with dead bolt lock, adjustable striker plate and radius corner sliding window (15"x22") Radius corner sliding window (15"x34") on each side of gooseneck nose Clothes bar over gooseneck, brush tray on door, and 6 bridle hooks on rear wall with carpeted panel underneath Carpet on floor, breast plate, and gooseneck nose floor Rear Tack Compartment Equipment Dimensions: 4'-6" long x 3'-0" wide Fold-away wall with quick release spring loaded latch pins between stalls & rear tack compartment Rear entry door, 29" wide x full height, with an all aluminum cast cam latch 4 bridle hooks on door Saddle racks, one per stall (maximum of 4) on a removable post with 1 blanket pole per 2 stalls and second location in front tack room Norstar LX Gooseneck Standard Features Fully loaded aluminum slant load gooseneck horse trailer with front slant tack room and rear tack compartment Available sizes 2-HORSE gooseneck, 15'-0" floor length w/2-5200# axles, 15" tires & 6-hole wheels 3-HORSE gooseneck, 18'-3" floor length w/2-5200# axles, 16" tires & 6-hole wheels 4-HORSE gooseneck, 21'-6" floor length w/2-6000# axles, 16" tires & 8-hole wheels 5-HORSE gooseneck, 24'-9" floor length w/2-6000# axles, 16" tires & 8-hole wheels 6-HORSE gooseneck, 28'-0" floor length w/2-7000# axles, 16" tires & 8-hole wheels Dimensions 6'-10" body width (maximum interior width without interior fender wells) 7'-1" body height, plus 7'-10" gooseneck length Undercarriage Rubber torsion axles with four wheel independent suspension Electric brakes on all wheels and greasable hubs for easy lubrication Radial tires on silver modular wheels with stainless steel center caps Spare tire, wheel, & rack Coupler & Jacks Adjustable hitch stem with 2-5/16" coupler and safety chains with hooks Heavy duty low profile gooseneck structure with wrap around aluminum main frame Single speed drop-leg jack with removable handle / lug wrench Emergency breakaway system; switch, cable, and battery box complete with battery (less charger) Design Features & Hardware All extruded aluminum construction Fully insulated roof, 1/2" thick "ENCOR" fiberglass reinforced structural panel w/R3 thermal value. The ultimate in temperature control Tapered nose, 6'-10" to 4'-10" wide with 18" radius corners 2" radius rear body corners & top rear header - for efficient aerodynamics Radius rocker panels around bottom of gooseneck structure with full length running boards (running boards not available on 8'-0" wide models) or upon request, radius rocker panels around bottom of gooseneck structure with full length rocker panels along each side Extruded aluminum interlocking floor, with extruded cross member supports at 6" centers Solid extruded aluminum interlocking side walls on stall area welded to 2"x1 3/8"x.125 tubing uprights with .050 pre-painted white aluminum sheet above and on side walls of front tack room area or smooth skinned with .050 white on complete exterior. Sheet attached with VHB structural tape for a smooth seamless appearance Polished stainless steel front nose sheet Stainless steel door hold backs on all full height doors and rubber hold backs on feed doors Rubber dock bumper below rear door Fender edge molding around exterior perimeter of fenders Non-skid safety tread on running boards at doors and front of fenders Colored vinyl graphics package Interior top rail enclosed with.050 white aluminum capping in stall area & front tack room Bolt on aluminum fenders Stall Area Equipment Removable slant divider (per two stalls) with extruded aluminum solid head partitions and quick release stainless steel slam latches Rubber interior kick mat wall lining (1/4" thick), 48" high on rear doors, slant wall, & head wall (48" is not applicable to models with mangers) and 54" high on butt wall with .090 aluminum kick plates and 1 3/8" thick styrofoam insulation underneath Fully insulated, stall area walls double lined with .050 white aluminum sheet & insulated with 1 3/8" styrofoam from kick plates up to top rail Vet type rubber floor mats (5/8" thick) Rear stall door, 36 1/2" wide x full height with an all aluminum cast cam latch and 15"x22" radius corner sliding window Heavy duty extruded aluminum fold down feed door per stall, with mid height latch for easy access and adjustable striker plate Heavy duty fold down safety bar grills, one per feed door 2 & 3 horse models do NOT include side access door 4,5, & 6 horse models include heavy duty extruded aluminum side access door at #1 stall Fold down feed door built in radius corner sliding windows with bar grills, 15"x22" on head side & 15"x34" on butt side, per stall Two-way aluminum flip-up roof vents, one per stall Stall padding, on dividers, partition wall, and rear door header Two interior and two exterior tie rings per stall, and one feed bag per stall Removable butt bar at rear stall door (removable chest bar at side access door in 4, 5, & 6 horse models) Lights DOT required lighting (stop, turn, tail, tag, marker, clearance and conspicuity tape) Extra marker lights (four extra on 2, 3, & 4 horse models and six extra on 5 & 6 horse models) Double tail lights (two high and two low) Two recessed rear exterior loading lights above rear doors on separate circuit with remote switch Recessed dome lights on separate circuit with remote switches (one per stall, two in front tack room, and one in rear tack compartment) Front Tack Room Equipment Dimensions: 4'-0" to 8'-0" long x 6'-10" wide plus 7'-10" gooseneck Full height partition wall between stalls and front tack room Entry door, 32" wide, on street side with dead bolt lock, adjustable striker plate and radius corner sliding window (15"x22") Radius corner sliding window (15"x34") on each side of gooseneck nose Clothes bar over gooseneck, brush tray on door, and 6 bridle hooks on rear wall with carpeted panel, and roll-up camper vent pre-framed for a/c Carpet on floor, breast plate, and gooseneck nose floor Rear Tack Compartment Equipment Dimensions: 4'-6" long x 3'-0" wide Fold-away wall with quick release spring loaded latch pins between stalls & rear tack compartment Rear entry door, 29" wide x full height, with an all aluminum cast cam latch and 4 bridle hooks Saddle racks, one per stall (maximum of 4) on a removable post with 1 blanket pole per 2 stalls and second location in front tack room